Clearing technique for plain grass

Our expert advice on how to clear plain grass, including movements and operating tips that make your work easier and more efficient.

Effective clearing of large areas of grass and long working hours call for powerful machines fitted with a trimmer head. The trimmer line’s cutting area is very large, but it is also very demanding on power, as the line causes a braking-while-cutting effect.

The engine as well as the cutting equipment work under extreme strain. Thanks to the torque increase, due to the gear ratio in the angle gear, even the smaller Jonsered brushcutters have a higher capacity than normal for their class. In parks, where grass clearing is often a question of removing weeds and trimming areas where lawn mowers cannot reach, this gives an extra power margin.

Working technique

You can work with either single or double-sided sweeping movements. Towards the end of the movement release the throttle and accelerate before starting the next movement. The reason why you should not operate the tool constantly at maximum speed is because clearing using a trimmer head is extremely demanding work for the machine. The engine must provide maximum power at the same time as the trimmer line causes a braking effect.

Clearing on slopes

The general rule when planning clearing work on slopes is that you always move along the slope, not up or down. Start at the bottom and let the cut material fall downwards, thereby avoiding using the machine in grass that has already been cut.